|
V型
• 贯穿轴，低转速
• 减速比： i = 1:1 至 6:1
• 最大输出扭矩至 T2 max = 5400 Nm
• 9个减速机尺寸，从边长35至 350 mm
- Continuous shaft, slow running
- Transmission ratios: i = 1:1 to 6:1
- Max. output torque up to T2 max = 5400 Nm
- 11gear unit sizes from 35 to350 mm edge length
|
|
VS型
• 贯穿轴，高转速
• 减速比： i = 1,5:1 和 2:1
• 最大输出扭矩至 T2 N = 650 Nm
• 6个减速机尺寸，从边长 090 至 260 mm
- Continuous shaft fast running
- Transmission ratios: i = 1.5:1 und 2:1
- Rated output torque up to T2 N = 650 Nm
- 6 gear unit sizes from 090 to 260 mm edge length
|
|
VL型
• 驱动端配有电机外壳和空心轴
• 可与IEC标准电机匹配
• 贯穿轴，低转速
• 减速比、扭矩和尺寸同V型产品
- Drive end with motor bell housing and hollow shaft
- Compartible for installation of IEC standard motor
- Continuous shaft, slow running
- Transmissionratios, torques and sizes like type V
|
|
VLM型
• 配有IEC标准电机
• 输出转速 112 至 2850 min-1
• 最大输出扭矩至 T2 max = Nm
- With IEC standard motor
- Output speed 112 to 2850 min-1
- Max. output torque up to T2 max = 5400 Nm
|
|
多轴减速机 / Multi shaft gearboxes
• 减速比从1.5至6:1（V型）
• 减速比从1.5至2:1（VS型）
• 配有实心或空心轴
• 轴端多达6个
- for ratios from 1.5 to 6:1 for type V
- for ratios from 1.5 to 2:1 for type VS
- with solid shaft or hollow shaft
- up to 6 shaft ends
|
