功能特点|Functions and special feature
中瑞技术合作产品，采用高转速（60000转/分钟）铣刀电机。X 或Y方向可同时刻5条线
A product of Sino-Swiss technologies,servomotors are imported from Switzerland.It runs at the rotary speed up to 60,000rpm.It enable engraves 5 lines both in X & Y axis simultaneously.
采用意大利AMT直线导轨作为传动轨道，保证机器高速运转平稳 且精度高。
AMT straight-line guide rails from ltaly are used as drive rails to ensure the machines will run in a steady manner at utmost accuracy.
采用日本松下电机控制铣刀上下运动，可随意控制铣刀的下刀 深度，对于有特殊要求的沟槽深度切割，即可由电脑控制切割任意深度。
Using Servo-motor from Panasonic,to control up,down. With computerized controls the depth of engraving,it enable the control of width and depth of the lines precisely according to the need users.
机器有三个功能头：高速铣刀头、X方向和Y方向5合1刀头。可 切割和刻线15mm以下的导光板，5合1刀头可根据材料的高低自动调节深浅度。
The machine has three function heads:high speed milling router, X and Yaxis 5 in 1 engraving head,to enable engraving and cut maximum 15mm acrylic board.Engraving head can be adjust automatically to control the size of groove,engraving lines.
整机数据线全部采用德国进口。
Date wire all imported from Germany.
机器台面采用美国进口纤维板，透气性好，耐用，不易变形。
Table mat are imported from USA,the fiber board are durable,with good,permeability,very stable in thickness and shape.
由最稳定的以太网口用网线传输数据，并可直接连接AI软件以 及Autocad,Coraldraw等所有软件输出
Date is transfer by Ethernet,the most stable method.File can be exported to machine directly from Adobe Illustrator,Coraldraw without conversion to maintain maximum accuracy.
设有安全装置（人手进入红外线范围以内，机器自动停止）。
Ultra Red Light sensor are equipped for user friendly and safety(machine automatically stop when perator's hand into the working area).
速度快，最快每秒可达到1500mm。
Machine can ruu at the maximum speed of up to 1500mm per second.
直接在机器上控制所有微调功能，包括图档自动优化功能，无 需另配多一台电脑。
All fine tuning can be made with control penal on the machine.
可由红外线激光灯定位切割任意新起点，快速而又准确。
Red Ultra-light positioning device for printed work can be cut accurately in easy and quickest way.